Umatshini wokuMila weZixhobo zeHlabathi X8126B
Umatshini wokugaya izixhobo ze-UniversalIIMBONAKALO
1. Ulwakhiwo lokuqala, ukusetyenziswa ngokubanzi, ukuchaneka okuphezulu, kulula ukuyisebenzisa.
2. Ngeziqhoboshelo ezahlukeneyo zokwandisa uluhlu lwezicelo kunye nokunyusa ukusetyenziswa.
3. Imodeli XS8126C: Ngenkqubo yokubonisa yedijithali eCwangcisiweyo, amandla okusombulula afikelela kwi-0.01mm.
IINKCUKACHA:
| IMODELI | X8126B/X8126C | |
| Indawo yokusebenza | 280x700mm | |
| Umgama phakathi kwe-axis ye-spindle ethe tye ukuya etafileni | Indawo yokuqala yokufaka | 35---385mm |
| Indawo yesibini yokufaka | 42---392mm | |
| Indawo yesithathu yokufaka | 132---482mm | |
| Umgama phakathi kwempumlo ye-spindle ethe nkqo ukuya kwi-axis ye-spindle ethe tye | 95mm | |
| Umgama phakathi kwempumlo ye-spindle ethe tye ukuya kwi-axis ye-spindle ethe nkqo | 131mm | |
| Ukuhamba okunqamlezileyo kwe-spindle ethe tye | 200mm | |
| Ukuhamba ngokuthe nkqo kwe-spindle quill ethe nkqo | 80mm | |
| Uluhlu lwesantya se-spindle esithe tye (amanyathelo asi-8) | 110--1230rmp | |
| Uluhlu lwesantya sokujika esithe nkqo (amanyathelo asi-8) | 150---1660rmp | |
| I-spindle hole taper | I-ISO40/Morse No.4 | |
| I-engile ejikelezayo ye-axis ethe nkqo ye-spindle | ±45° | |
| Ukuhamba kwetafile okude/okuthe nkqo | 350mm | |
| Iifeeds zetafile ngendlela ende, nethe nkqo kwaye | 25---285mm/ngomzuzu | |
| Ukuhamba ngokukhawuleza kwetafile kwiindlela ezinde nezithe nkqo | 1000mm/ngomzuzu | |
| Injini ephambili | 3kw | |
| Injini yepompo yesipholisi | 0.04kw | |
| Ubukhulu obupheleleyo | 1450x1450x1650 | |
| Ubunzima obupheleleyo/obupheleleyo | 1180/2100 | |
| Ubukhulu bokupakisha ngokubanzi | 1700x1270x1980 | |
