Umatshini wokusila ibhedi XZ5150
Umatshini wokugrumba othe nkqo
1.Iindlela zetafile eziziingxande ezinozinzo oluphezulu
2.I-feed ye-spindle ezenzekelayo
3. Ukuphakamisa nokwehlisa i-headstock ngenjini
4. Ii-Headstock swivels±45°
5. Umphezulu wetafile oqinileyo nowomhlaba.
IINKCUKACHA
| IINKCUKACHA | IYUNITHI | XZ5150A | XZ5150 |
| Ububanzi obuphezulu bokugaya obuthe nkqo. | mm | 32 | 32 |
| Ububanzi obukhulu bokugalela isiphelo | mm | 125 | 125 |
| Ubuninzi bokubhola. | mm | 50 | 50 |
| I-spindle taper | 7:24 ISO40 | 7:24 ISO40 | |
| Uhambo lwe-Spindle | mm | 180 | 180 |
| Uluhlu lwesantya se-spindle | r/min | 94-2256 (amanyathelo ali-16) | 94-2256 (amanyathelo ali-16) |
| Isingxobo se-Automatic Feed Series | mm/r | 0.1/0.15/0.3(amanyathelo ama-3) | 0.1/0.15/0.3(amanyathelo ama-3) |
| Umgama we-spindle ukuya etafileni | mm | 100-580 | 100-600 |
| Umgama we-spindle ukuya kwikholamu | mm | 400 | 400 |
| I-engile ejikelezayo yentloko | 45 | 45 | |
| Isantya sokunyuka/sokwehla kwentloko | mm/ngomzuzu | 2000 | 2000 |
| Ubungakanani betafile | mm | 1250x360 | 1220x360 |
| Uhambo lwetafile | mm | 600x360 | 600x360 |
| Uluhlu lwezondlo zeetafile | mm/ngomzuzu | 22-555 (amanyathelo asi-8)810 (ubuninzi.) | 18-555 (amanyathelo asi-8)810 (ubuninzi.) |
| Isithuba setafile esingu-T (ububanzi/umgama) | mm | 3/18/80 | 3/14/95 |
| Injini ephambili | kw | 1.5/2.4 | 1.5/2.4 |
| Injini yokutya kwamandla etafileni | w | 750 | 370 |
| Injini yentloko ephezulu/esezantsi | w | 550 | 550 |
| Injini yepompo yesipholisi | w | 40 | 40 |
| NW/GW | kg | 1900/2150 | 1760/2000 |
| Ubukhulu obupheleleyo | mm | 1800x1900x2300 | 1730x1730x2300 |
