Umatshini wokugrumba we-Universal Milling ZX6350ZB
Umatshini wokugaya we-Universal Drilling
Umphezulu wetafile oqinileyo nowomhlaba.
Ukutya ngokuzenzekelayo kwi-X, Y Axis, ukuphakamisa ngenjini kunye nokuwa kwetafile kwi-Z axis.
Intloko yokugaya ethe nkqo iqhutywa ziigiya kwaye ityiwa ngoomatshini; Ingajika ijikeleze ±45°;.
Kulula ukutshintshiselana phakathi kokugaya okuthe tye nokuthe nkqo.
IINKCUKACHA:
| IMODELI |
| I-ZX6350ZB |
| I-spindle taper | I-MT4 ISO40 ISO30 | |
| ububanzi bokugrumba obukhulu | mm | Φ50,30 |
| uhambo lwe-spindle | mm | 120 |
| ukutya kwesandla | mm | 0.08/0.15/0.25 |
| Umgama ukusuka kwi-spindle ethe nkqo ukuya kwikholamu | mm | 200--500 |
| Umgama ukusuka kwi-spindle ethe nkqo ukuya etafileni | mm | 100-400 |
| Umgama ukusuka kwi-spindle ethe tye ukuya etafileni | mm | 0-300 |
| Umgama ukusuka kwi-spindle ethe tye ukuya engalweni | mm | 175 |
| Uluhlu lwesantya se-spindle | r/min | 60-1500/8 (ngokuthe nkqo) |
| Ubungakanani betafile | mm | 1370*360 |
| Uhambo lwetafile | mm | 800*300*300 |
| Isantya sokunyuka/sokwehla kwetafile | mm | 560 |
| Injini yentloko ephezulu/esezantsi | w | 750 |
| Isithuba setafile esingu-T (Inombolo/ububanzi/umgama) | mm | 3/14/70 |
| Injini ephambili | kw | 1.5 (ethe nkqo); 2.2 (ethe tye) |
| Injini yokutya kwamandla etafileni | w | 750 |
| Injini yepompo yesipholisi | w | 40 |
| isantya sentloko yesipholisi | m3/h | 12 |
| NW/GW | kg | 1550/1700 |
| Ubukhulu obupheleleyo | mm | 1750*1500*2150 |
