Umatshini wokugrumba we-Universal Milling ZX6350ZA
Umatshini wokugrumba:
Intloko yokugaya ukutya okuzenzekelayo kwe-Z
2. Indlela ejikelezayo ekwiqonga lokuphakamisa
3. Uzinzo oluphezulu
4. Iqiniswe kwi-X, Y, Zaxes.
5. Iijikajika zentloko ezithe nkqo +- 45 degrees.
6. Uhambo lwe-X-axis lunokuba ne-800mm (Ukhetho)
IINKCUKACHA:
| IMODELI | IYUNITHI | I-ZX6350ZA |
| I-spindle taper |
| I-MT4/ISO40 |
| Umgama othe nkqo we-spindle ukuya etafileni | mm | 100-400 |
| Umgama othe tye we-spindle ukuya etafileni | mm | 0~300 |
| Umgama we-spindle ukuya kwikholamu | mm | 200~550 |
| Uluhlu lwembewu yespindle | r/min | (Amanyathelo asi-8) 60-1500 (ngokuthe nkqo) |
| Isingxobo se-Automatic Feed Series | mm | 120 (ethe nkqo) |
| Ubungakanani betafile | mm | 1250×320 |
| Uhambo lwetafile | mm | 800/300/300 |
| Umgama othe tye we-spindle ukuya engalweni | mm | 175 |
| Uluhlu lwee-feeds zetafile (x/y) | mm/ngomzuzu | 22-555(amanyathelo asi-8)(ubuninzi.810) |
| T yetafile (inombolo/ububanzi/umgama) | mm | 3/14/70 |
| Injini ephambili | kw | 0.85/1.5 (ngokuthe nkqo); 2.2 (ethe tye) |
| Injini yokutya kwamandla etafileni | w | 750 |
| Injini yepompo yesipholisi | w | 40 |
| NW/GW | kg | 1450/1600 |
| Ubukhulu obupheleleyo | mm | 1700×1480×2150 |
| IZIXHOBO EZIQHELEKILEYO | IZIXHOBO EZIZIKHETHELAYO |
| Isibane somsebenzi, isibandisi, i-drill chuck, i-mill chuck, ii-spindle arbors, ii-horizontal arbors, ii-wrenches | I-DRO kwi-X, Y, Z--AXIS. Intloko yokwahlulahlula jikelele. Itheyibhile yokusebenza ejikelezayo. Isixhobo sokubopha. |
