Umatshini wokusila we-Universal Vertical Horizontal Ram LM1450A
IIMPAWU ZOMSHINI WOKUGQIBELA WE-UNIVERSAL HEAD:
- Umatshini wokugaya intloko ojikelezayo we-LM-1450A usekelwe kwi-LM1450,
2. Ukufakelwa kwetafile ejikelezayo ngama-45 degrees,
3. Ukucutshungulwa koluhlu olubanzi, ii-three-axles ngokuzenzekelayo feeds,
4. I-torque enkulu kunye namandla aqinileyo, 1.5KW,
5. Ihamba ngokukhawuleza i-2000mm/min.
6. I-Spindle taper yi-ISO 50IINKCUKACHA:
| IMODELI | IYUNITHI | LM1450A |
| Ubungakanani betafile | mm | 1600x360 |
| Inombolo yesithuba se-T/ububanzi/umgama | no | 5/18/80 |
| Umthwalo ophezulu weTheyibhile | kg | 400 |
| i-engile ejikelezayo yetafile | isidanga | ±45º |
| Itheyibhile Uhambo olude (ngesandla/ngemoto) | mm | 900 |
| itafile Uhambo olunqamlezileyo (ngesandla/oluzenzekelayo) | mm | 320 |
| itafile Ukuhamba ngokuthe nkqo (ngesandla/ngokuzenzekelayo) | mm | 400 |
| I-engile ejikelezayo yentloko yokugaya | 360º | |
| I-spindle taper | I-ISO50 | |
| isantya se-spindle / inyathelo -- Ithe nkqo | i-rpm | 60-1800 |
| --Ethe tyaba | i-rpm | 60-1700 |
| Umgama ukusuka kwi-axis ethe nkqo ye-spindle ukuya kumphezulu wekholamu | mm | 160-800 |
| Umgama ukusuka kwimpumlo ye-spindle ethe nkqo ukuya kumphezulu wetafile | mm | 200-600 |
| Umgama ukusuka kwi-axis ye-spindle ethe tye ukuya kumphezulu wetafile | mm | 0-400 |
| Umgama ukusuka kwi-axis ye-spindle ethe tye ukuya ezantsi kwe-ram | mm | 200 |
| uhambo lwenkunzi | mm | 600 |
| Ukutya okude/okunqamlezileyo | mm/umzuzu | 30~630(X,Y) |
| Isondlo esithe nkqo/inyathelo | mm/ngomzuzu | 30~630(Z) |
| Isantya esikhawulezayo se-longitudinal/cross | mm/umzuzu | 2000 (XY) |
| I-Rapid Traverse ethe nkqo | mm/ngomzuzu | 2000 (Z) |
| injini ephambili | kw | 4 |
| (X/Y/Z) i-motor yokutya | kw | 1.5 |
| injini yesipholisi | kw | 90W |
| ubukhulu bubonke | cm | 207x202.5x220 |
| Ubunzima bomatshini | kg | 2650 |
