Umatshini wokusila wezixhobo ze-Universal X8140A
Umatshini wokugaya izixhobo ze-Universal
Lo matshini wenzelwe ukuba ube sisixhobo esisetyenziswa ngumntu wonkeUmatshini wokugaya, unako
ukwenza iinkqubo ezinje ngokusila, ukubopha, ukubhoboza, kunye nokutshixa, njl.njl.,
kwaye ifanelekile kwi-machining cutter, fixture, die kunye ne-mold, kunye nezinye
izinto ezineempawu ezintsonkothileyo. Ngoncedo lweendidi ezahlukeneyo ezikhethekileyo
izincamathiselo, ingasebenza kuzo zonke iintlobo zezinto ezifana ne-arc, i-gear, i-rack, i-spline, njalo njalo.
Ulwakhiwo lokuqala, ukusetyenziswa ngokubanzi, ukuchaneka okuphezulu, kulula ukuyisebenzisa.
Ngeziqhoboshelo ezahlukeneyo zokwandisa uluhlu lwezicelo kunye nokunyusa ukusetyenziswa.
Imodeli XS8140A: enenkqubo yokubonisa yedijithali ecwangcisiweyo, amandla okusombulula afikelela kwi-0.01mm
IINKCUKACHA:
| IINKCUKACHA | X8140A | X8132A | |
| Itafile yokusebenza | Itafile yokusebenza ethe tye fW x L) | 400×800 mm | 320×750mm |
| Itheyibhile yokusebenza ethe nkqo (W x L) | 250×950mm | 250×850mm | |
| Uhambo olude/olunqamlezileyo/oluthe nkqo | 500/350/400 | 400/300/400 | |
| Itafile yendalo yonke | Ukujika okuthe tye | ±360 ° | ±360° |
| Ukuthambekela phambili nangasemva | ±30 ° | ±30° | |
| Ukuthambekela ekhohlo nasekunene | ±30 ° | ±30° | |
| Intloko ye-spindle ethe nkqo | Ukuhamba ngokuthe nkqo kwe-quill | 60mm | 60mm |
| Ukuthambekela kwe-axis ekhohlo nasekunene | ±90 ° | ±90° | |
| I-spindle ethe tye | Umngxuma weTaper | I-ISO40 | IS040 |
| I-heigl.t ukusuka kwi-axis ukuya emhlabeni | 1330mm | 1330mm | |
| Umgama omncinci phakathi kwe-axis kunye nomphezulu wetafile ethe tye | 35mm | 40mm | |
| I-spindle ethe nkqo | Umngxuma weTaper | I-ISO40 | IS040 |
| Umgama omncinci phakathi kwempumlo nomphezulu wetafile ethe tye | 5mm | 10mm | |
| Isantya se-spindle esithe tye nesithe nkqo: amanyathelo / uluhlu | Amanyathelo ali-18/40-2000rpm | Amanyathelo ali-18/40-2000rpm | |
| Iifeeds ezinde, ezinqamlezileyo nezithe nkqo: amanyathelo / uluhlu | Amanyathelo ali-18/10 -500mm/min | Amanyathelo ali-18/10-500mm/min | |
| I-Axial feed ye-quill ye-spindle ethe nkqo: amanyathelo / uluhlu | Ukulala oku-3/0.03- 0.12mm/rev. | Amanyathelo ama-3/0.03-0.12mm/uhlaziyo. | |
| Amandla emoto ephambili / Imoto yokuphakela | 3kW/1.5kW | 3kW/1.5kW | |
| Umthwalo wetafile ophezulu / Umthwalo omkhulu wokusika | 400kg /500kg | 300kg/500kg | |
| Ubukhulu obupheleleyo (L × W×H)/ Ubunzima obupheleleyo | 182×164×171cm /2300kg | 181×122×171cm /2200kg | |
| Ubungakanani bokupakisha (L × W × H) / Ubunzima obukhulu | 205×176×208cm | 199×164×211 cm/3000kg | |
