Umatshini wokusila weTurret XH6325
INKCAZELO YEEMPAHLA
Esi sixhobo somatshini sinomsebenzi othe nkqo, othe tye, oneendidi ezimbini, umngxuma we-spindle taper unokufaka zonke iintlobo ze-column milling cutter, i-wafer milling cutter, i-molding milling cutter, i-end milling cutter kunye ne-cutter, efanelekileyo yokucubungula zonke iintlobo zendiza, i-inclination, i-groove, umngxuma, izixhobo kunye nezinye izinto ezincinci, kwaye sisixhobo esifanelekileyo sokucubungula umatshini, i-mold, izixhobo, iimoto, iimoto kunye nezinye izinto zoshishino.
Indlela yokutyibilika kwisihlalo igcwele izinto zokunxiba zeTF zombini i-X axis kunye ne-Y axis.
| IMODELI | XH6325 | XH6325D |
| Iimbonakalo | Indlela yesikhokelo engunxande kwi-Y/Z-axis | |
| Ubungakanani betafile | 305×1370 | 305x1370 |
| Ukulayisha itafile | 350Kg | 350kg |
| Uhambo olude | 800mm | 800mm |
| Uhambo olunqamlezileyo | 420mm | 420mm |
| Uhambo oluthe nkqo | 420mm | 420mm |
| Inombolo ye-T-slot kunye nobukhulu | 3×16 | 3×16 |
| Uhambo lweRam | 470mm | 470mm |
| Umgama ukusuka empumlweni yespindle ukuya kumphezulu wetafile | 0-405mm | 0-405mm |
| I-spindle hole taper | I-ISO40(V) 7:24(H) | I-ISO40(V) 7:24(H) |
| Ububanzi bemikhono | 85mm | 85mm |
| Uhambo lwe-Spindle | 127mm | 130mm |
| Isantya se-spindle | (esemgangathweni): (umgangatho we-shift) 50HZ: 66-4540(V) 60HZ: 80-5440(V)50HZ: 45-980(H) 60HZ: 55-1180(H) | |
| I-Auto. quill feed | (amanyathelo amathathu): 0.04 (0.0015") / 0.08 (0.003") / 0.15 (0.006") mm/uguquko | (amanyathelo amathathu): 0.04 (0.0015") / 0.08 (0.003") / 0.15 (0.006") mm/uguquko |
| Injini ye-spindle (ethe nkqo) | 3.75KW/5HP(380V) 2.2KW/3HP(220V) Intloko yokugaya evela eTaiwan | 3.75KW/5HP(380V) 2.2KW/3HP(220V) Intloko yokugaya evela eTaiwan |
| Injini ethe tye | 3KW | 3KW |
| Intloko ejikelezayo | 90° | 90° |
| Ukuthambekisa intloko | 45° | 45° |
| Ubungakanani bephakheji | 1516×1550×2250 | 1516×1550×2500 |
| I-GW/iseti | 1450Kg | 1500Kg |
