Umatshini Wokutshiza Izixhobo MR-U3
Iimpawu zokusebenza:
Ukusika i-HSS kunye ne-carbide engraving cutter kunye ne-single lip okanye i-multiple lip cutters ezineemilo ezahlukeneyo ezifana ne-radiuses cutters okanye i-negative taper angle ye-cutters.
Intloko yesalathisi sendalo inikwe kwiindawo ezingama-24 ukuze kufumaneke nayiphi na i-engile ethile yesimo, ukujikeleza kwasimahla kwe-3600 okanye i-100 kuvunyelwe ukugaya ii-End Mills, i-Twist Drill, kunye ne-Lathe Tools, buyisela kuphela into eqhotyoshelweyo kwintloko yesalathisi ngaphandle kokuseta okuntsonkothileyo.
Ipharamitha yobugcisa:
| Imodeli | MR-U3 |
| Umthamo ophezulu wekholethi | Φ18 mm |
| Ubuninzi bokugaya. | Φ18 mm |
| I-engile yeTaper | 0 ~ 180 (idigri) |
| I-engile yokunceda | 0 ~ 45 (idigri) |
| I-engile engalunganga | 0 ~ 25 (idigri) |
| Injini | 1/3HP 220V 50HZ |
| Ukugaya i-spindle | 5200rpm |
| Ivili lokusila | Φ100×50×Φ20 |
| Ubukhulu | 55×46×49cm |
| Ubunzima | 65 kg |
| Izixhobo Eziqhelekileyo | Iikholethi ezi-3: ф4, ф6, ф8, ф10, ф12 |
| Ivili Lokugaya ×1 | |
| Isincamathelisi sokusila se-twist drill×1 | |
| Isincamathiselo sokugaya isiphelo semill×1 | |
| Izixhobo zokugaya ezenziwe nge-lathe×1 | |
| Izixhobo zokhetho | iikholethi: ф3, ф4, ф5, ф6, ф8, ф9, ф10, ф12, ф14, ф16, ф18 |
