Umatshini weLathe weCNC Slant Bed CLK6150S
Ibhedi ethambileyoI-LATHEOMATSHINI IIMBONAKALO:
Isitokhwe somsila we-hydraulic
Ibhedi ethambileyo engama-30°, ukususwa kweetships kuthambile, kuqinile kwaye kulungile
I-turret ye-hydraulic enezikhundla ezili-10, i-chuck ye-hydraulic engenanto enesantya esiphezulu esi-8 kunye neenzipho ezithambileyo
Isikhokelo sokuqengqeleka esinobungqongqo obuphezulu
Iyunithi yokuluka ngesantya esiphezulu (4000rpm)
IZIXHOBO EZIQHELEKILEYO:
Inkqubo ye-FAUNC OI mate-TC CNC, i-7.5 KW Servo spindle motor
Ibhedi ethe tyaba engama-30°
I-hydraulic chuck enemihlathi emithathu kunye nomhlathi othambileyo
Isikhokelo sokuqengqeleka esithe nkqo se-X/Z
Iyunithi ye-spindle enesantya esiphezulu
I-turret ye-hydraulic enezikhundla ezili-10
Inkqubo yokuthambisa ezenzekelayo
I-chain auto chip conveyor kunye nemoto yesinyithi esilahliweyo
l FAUNC Oi mate-TC CNC inkqubo servo spindle
Isixhobo sokususa iitshiphusi ngokuzenzekelayo.
IZIXHOBO EZINGENAKHETHEKILEYO:
GSK980TD, HNC-21TD okanye KND-1000T, GT-66T.
Inkqubo ye-Siemens 801 CNC
Isixhobo sokususa iitshiphusi ngokuzenzekelayo.
I-Spring chuck
IINKCUKACHA:
| IINKCUKACHA | IYUNITHI | CLK6140S | CLK6150S |
| Ujingi oluphezulu phezu kwebhedi | mm | Φ540 | Φ700 |
| Ukujikeleza okuphezulu phezu kwenqwelo | mm | Φ270 | Φ380 |
| Ubude be-workpiece ephezulu | mm | 550 | 600 |
| Uhambo lwe-X axis | mm | 220 | 245 |
| Uhambo lwe-Y axis | mm | 660 | 600 |
| Ukuchaneka kokubekwa kwe-axis ye-X/Y/Z | mm | 0.012 | X:0.012;Z:0.02 |
| Ukuchaneka kokubeka kwakhona i-axis ye-X/Y/Z | mm | 0.006 | X:0.007;Z:0.008 |
| Ukutya okukhawulezayo kwe-X,Z | m/ngomzuzu | 12/16 | 30/30 |
| I-chuck yoxinzelelo lwe-hydraulic | 8″ | 10″ | |
| Amanani ezixhobo | 10 | 12 | |
| Amandla enjini aphambili | kw | 7.5 | 18.5-22 |
| Isantya esiphezulu se-spindle | r/min | 4000 | 4000 |
| Ibhorethi yespindle | mm | Φ52 | Φ86 |
| Ubukhulu obupheleleyo | mm | 2720×1580×1870 | 3600×2000×1950 |
| Ukusinda okushiyekile | kg | 3500 | 7000 |
