Umatshini weLathe weCNC Flat Bed CK6125
I-CNC LATHESIIMBONAKALO:
Lo matshini usetyenziswa kakhulu ekucubunguleni izixhobo zombane, izixhobo, iimoto, iibhayisekile,
i-fastener, i-bearing, oomatshini bokufota kunye nefilimu, izixhobo zehardware, iiwotshi, iiglasi, iimoto zokubhala,
iivalvu, umbhobho wegesi kunye nezinye izinto ezichanekileyo nezintsonkothileyo. Sisixhobo esifanelekileyo nesisebenza kakuhle
kushishino loomatshini behardware.
UMGANGATHOAIZIXHOBO:
1. Isantya esingenasiphene sokuphindaphindeka
2.Inkqubo ye-servo
I-turret yombane yesitishi se-3.4
IINKCUKACHA:
| IINKCUKACHA | CK6125 | CK6130 |
| Ujingi oluphezulu phezu kwebhedi | 250 mm | 300 mm |
| Ujingi oluphezulu phezu kwesilayidi esinqamlezileyo | 100 mm | 90 mm |
| Ubude obukhulu bokucubungula | I-Chuck 260/i-collet320 mm | I-Chuck 290/i-collet400 mm |
| Ibhorethi yespindle | 48 mm | 48 mm |
| Ububanzi obukhulu bebha | 41 mm | 41 mm |
| Impumlo yespindle | A2-5 | A2-5 |
| Isantya se-spindle | 150-2500 ngomzuzu | 150-2500 ngomzuzu |
| Amandla enjini ye-spindle | 4 kw | 4 kw |
| Uhambo lwe-axis ye-X/Z | 300/350 mm | 300/380 mm |
| I-torque ye-axis ye-X/Z | I-Servo 4/4 kw | 4/4 kw |
| Isantya sokondla esikhawulezayo se-axis ye-X/Z | 8/10 m/ngomzuzu | 8/10 m/ngomzuzu |
| Ukuchaneka kwendawo ye-axis ye-X/Z | 0.01/0.015 mm | 0.01/0.015 mm |
| Ukuphindaphinda kwe-axis ye-X/Z | 0.012/0.013 mm | 0.012/0.013 mm |
| Icandelo lebha yezixhobo | 16*16 mm | 16*16 mm |
| Idia yesikhafu seTailstock. | 52 mm | 52 mm |
| Uhambo lwe-tailstock sleeve | 90 mm | 100 mm |
| I-Taper ye-Tailstock | MT4# | MT4# |
| NW | 950 kg | 1200 kg |
| Ubukhulu bomatshini (L*W*H) | 1780*800*1600 mm | 1750*1200*1570 mm |
