I-Bench Lathe CJM250
IIMPAWU ZE-LATHE YE-MICRO BENCH:
Iindlela ezichanekileyo zokusila kunye neendlela eziqinileyo zebhedi.
I-spindle ixhaswa ngee-bearings ze-roller ezichanekileyo.
Iigiya zentloko zenziwe ngentsimbi ekumgangatho ophezulu, zigayiwe kwaye ziqinile.
Iilever zokutshintsha isantya sokusebenza ezilula.
Isantya se-spindle siqala kwi-80-1600rpm.
Ibhokisi yegiya esebenza lula inemisebenzi eyahlukeneyo yokufunxa kunye nokusika imisonto.
Ukuba ikhabhinethi ibekwe okanye ingekho ngokwemfuneko.
IINKCUKACHA:
| IINKCUKACHA | IIYUNITHI | CJM250 |
| Ilatheububanzi bokujika obukhulu bebhedi | mm | 250 |
| Ububanzi bokujika be-skateboard enkulu | mm | 500 |
| Itheyibhile ejikelezayo yobukhulu bomsebenzi | mm | 150 |
| Ububanzi bomngxuma we-Spindle | mm | 26 |
| I-Taper ye-spindle | mm | Inombolo 4 |
| Isantya se-spindle | mm | 80—1600r/rpm 12 |
| I-stroke ephezulu ethe tye ye-cutter | mm | 130 |
| Isakhelo semela sohambo olude oluphezulu | mm | 75 |
| Ukucubungula inombolo yomsonto we-metric | mm | 15 |
| Uluhlu lokucubungula imisonto ye-metric | mm/r | 0.25-2.5 |
| I-turret ye-spindle ye-longitudinal feed kuyo yonke indawo | mm | 0.03-0.275 |
| Ubungakanani bokutya okunqamlezileyo nge-turn spindle turret | mm | 0.015-0.137 |
| Ubuninzi bokuhamba kwesingxobo se-tailstock | mm | 60 |
| Nciphisa umkhono we-tailstock | mm | Inombolo 3 |
| Oomatshini bombane | w | 750W/380V/50HZ |
| Ubunzima obupheleleyo / obupheleleyo | kg | 180/163 |
| Ubukhulu (ubude * ububanzi * ukuphakama) | mm | 1130×550×405 |
| Ubungakanani bokupakisha (ubude * ububanzi * ukuphakama) | mm | 1200×620×600 |
